SAR 104.00
SAR 136.00 Discount 24%Direct power boot cable with 26 battery connectors for iPhone 6 to 16 Pro Max boards and 4000+ Android phones, 3A output and cut-off above 12 V.
Mechanic Power PCB Power Boot Cable for iPhone and Android
A power boot cable from Mechanic that gathers 26 battery connectors into one yellow triangular hub and links a phone board straight to a bench power supply in place of the battery, so you can start the phone, watch its boot current and pin down the fault. Ten connectors serve iPhone models from iPhone 6 to iPhone 16 Pro Max, and sixteen numbered connectors serve Android phones, more than 4000 models according to the box.
Features
- 26 battery connectors on one cable: 10 for iPhone and 16 for Android, each labelled with its model or number.
- Plug and play, with the identification resistor built in, so nothing else is needed.
- Cuts the output automatically when the input goes above 12V, protecting the board from excess voltage.
- Output current up to 3A with a steady supply for starting and testing the phone.
- Thick copper-core wires with low resistance for a more accurate current reading.
- Flexible, bend-resistant wires, rated by the maker at more than 10000 bending tests.
- Precisely sized connectors that match the board's battery socket and lower the risk of damaging it.
- Red and black banana plugs for the power supply, and an indicator light on the hub.
Suitable for
A general bench tool for repair shops, suited to:
- iPhone boards
- Android phone boards
- Boot current checks
- No-power faults
- Charging and battery faults
Technical Specifications
| Brand | Mechanic |
|---|---|
| Model | Power PCB |
| Tool Type | Direct power boot cable for phone boards (iPhone and Android) |
| Product Code | 210609241400957 |
| Warranty | Working-on-arrival warranty only |
| Connectors | 26 (10 iPhone + 16 Android) |
| iPhone Connectors | 6G, 6P–6SP, 7G–7P, 8G–XS Max, iPhone 11, 12–12 Pro Max / 15 / 15 Plus, 13 / 14 / 15 Pro / Pro Max, iPhone 13 / 14, iPhone 16, iPhone 16 Pro Max |
| Android Models | More than 4000 models through 16 numbered connectors |
| Recommended Input | 3.7 – 4.6V |
| Output Current | 3A |
| Protection | Automatic cut-off above 12V input, built-in identification resistor |
| Power Supply Connection | Red and black banana plugs |
| Box Size | 96 × 36.5 × 127 mm |
| Gross Weight | 145 g |
| In the Box | 1 power boot cable |
Usage Tips
- Set the power supply between 3.7 and 4.6 volts before connecting.
- Pick the connector labelled with the phone's model or the number that matches the board's battery socket.
- Start with a low current limit and watch the reading as the phone boots.
Checked Quality
Every UFix tool is checked before shipping, with delivery across the Kingdom.
Customer reviews
Overall rating
0.0
Rating snapshot
5 stars
0
4 stars
0
3 stars
0
2 stars
0
1 star
0
There are no reviews yet. Be the first one to review this product